Problem migrating from CentOS Stream to Rocky Linux

Unix & Linux Stack Exchange，Unix & Linux Stack Exchange，Stack Exchange 上的 Linux 与 Unix 系统问答社区。关注

I ran the migrate2rocky shell script to migrate an old laptop with CentOS Stream 8 to Rocky Linux.

However, it returns some errors:

# ./migrate2rocky.sh -r

migrate2rocky - Begin logging at Thu 17 Sep 2026 09:27:14 PM CEST.

Error: Check discovered 5 problem(s)
anaconda-gui-33.16.5.6-1.el8.x86_64 has missing requires of system-logos
gdm-1:40.0-15.el8.x86_64 has missing requires of system-logos
gnome-session-3.28.1-13.el8.x86_64 has missing requires of system-backgrounds
gnome-session-3.28.1-13.el8.x86_64 has missing requires of system-logos
plymouth-graphics-libs-0.9.4-10.20200615git1e36e30.el8.x86_64 has missing requires of system-logos

Errors found in dnf/rpm database.  Please correct before running migrate2rocky.

An error occurred while we were attempting to convert your system to Rocky Linux. 
Your system may be unstable. Script will now exit to prevent possible damage.

A log of this installation can be found at /var/log/migrate2rocky.log

I could not find the system-logos and system-backgrounds packages, from where can I get them?

EDIT 1:

First I disabled all repos and added just these two:

[baseos]
name=CentOS Stream 8 - BaseOS
baseurl=https://dl.rockylinux.org/vault/centos/8-stream/BaseOS/$basearch/os/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial

[appstream]
name=CentOS Stream 8 - AppStream
baseurl=https://dl.rockylinux.org/vault/centos/8-stream/AppStream/$basearch/os/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial

Then I ran:

dnf reinstall -y centos-logos centos-backgrounds

Then I deleted the two repos again and ran this script which restores the vaulted CentOS Stream 8 repos:

cat > /etc/yum.repos.d/CentOS-Stream-AppStream.repo << EOF
# CentOS-Stream-AppStream.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[appstream]
name=CentOS Linux \$releasever - AppStream
baseurl=https://vault.centos.org/8-stream/AppStream/\$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-BaseOS.repo << EOF
# CentOS-Stream-BaseOS.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[baseos]
name=CentOS Linux \$releasever - BaseOS
baseurl=https://vault.centos.org/8-stream/BaseOS/\$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-ContinuousRelease.repo << EOF
# CentOS-Stream-ContinuousRelease.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
#
# The Continuous Release (CR) repository contains packages for the next minor
# release of CentOS Linux.  This repository only has content in the time period
# between an upstream release and the official CentOS Linux release.  These
# packages have not been fully tested yet and should be considered beta
# quality.  They are made available for people willing to test and provide
# feedback for the next release.
[cr]
name=CentOS Linux \$releasever - ContinuousRelease
baseurl=https://vault.centos.org/8-stream/cr/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Debuginfo.repo << EOF
# CentOS-Stream-Debuginfo.repo
#
# All debug packages are merged into a single repo, split by basearch, and are
# not signed.
[debuginfo]
name=CentOS Linux \$releasever - Debuginfo
baseurl=https://debuginfo.centos.8-streamch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Devel.repo << EOF
# CentOS-Stream-Devel.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[devel]
name=CentOS Linux \$releasever - Devel WARNING! FOR BUILDROOT USE ONLY!
baseurl=https://vault.centos.org/8-stream/Devel/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Extras.repo << EOF
# CentOS-Stream-Extras.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[extras]
name=CentOS Linux \$releasever - Extras
baseurl=https://vault.centos.org/8-stream/extras/\$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-FastTrack.repo << EOF
# CentOS-Stream-FastTrack.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[fasttrack]
name=CentOS Linux \$releasever - FastTrack
baseurl=https://vault.centos.org/8-stream/fasttrack/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-HighAvailability.repo << EOF
# CentOS-Stream-HighAvailability.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[ha]
name=CentOS Linux \$releasever - HighAvailability
baseurl=https://vault.centos.org/8-stream/HighAvailability/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Media.repo << EOF
# CentOS-Stream-Media.repo
#
# You can use this repo to install items directly off the installation media.
# Verify your mount point matches one of the below file:// paths.
[media-baseos]
name=CentOS Linux \$releasever - Media - BaseOS
baseurl=file:///media/CentOS/BaseOS
        file:///media/cdrom/BaseOS
        file:///media/cdrecorder/BaseOS
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[media-appstream]
name=CentOS Linux \$releasever - Media - AppStream
baseurl=file:///media/CentOS/AppStream
        file:///media/cdrom/AppStream
        file:///media/cdrecorder/AppStream
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Plus.repo << EOF
# CentOS-Stream-Plus.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[plus]
name=CentOS Linux \$releasever - Plus
baseurl=https://vault.centos.org/8-stream/centosplus/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-PowerTools.repo << EOF
# CentOS-Stream-PowerTools.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[powertools]
name=CentOS Linux \$releasever - PowerTools
baseurl=https://vault.centos.org/8-stream/PowerTools/\$basearch/os/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF
cat > /etc/yum.repos.d/CentOS-Stream-Sources.repo << EOF
# CentOS-Stream-Sources.repo
[baseos-source]
name=CentOS Linux \$releasever - BaseOS - Source
baseurl=https://vault.centos.org/8-stream/BaseOS/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[appstream-source]
name=CentOS Linux \$releasever - AppStream - Source
baseurl=https://vault.centos.org/8-stream/AppStream/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[powertools-source]
name=CentOS Linux \$releasever - PowerTools - Source
baseurl=https://vault.centos.org/8-stream/PowerTools/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[extras-source]
name=CentOS Linux \$releasever - Extras - Source
baseurl=https://vault.centos.org/8-stream/extras/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
[plus-source]
name=CentOS Linux \$releasever - Plus - Source
baseurl=https://vault.centos.org/8-stream/centosplus/Source/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
EOF

cat > /etc/yum.repos.d/CentOS-Stream-Extras-common.repo << EOF
# CentOS-Stream-Extras-common.repo
#
# The mirrorlist system uses the connecting IP address of the client and the
# update status of each mirror to pick current mirrors that are geographically
# close to the client.  You should use this for CentOS updates unless you are
# manually picking other mirrors.
#
# If the mirrorlist does not work for you, you can try the commented out
# baseurl line instead.
[extras-common]
name=CentOS Stream $releasever - Extras common packages
baseurl=https://vault.centos.org/8-stream/extras/\$basearch/extras-common/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Extras
EOF

Finally I ran the migrate2rocky script again.

This allowed the script to proceed with the dnf update. However, now the script end with this error:

Error: Check discovered 1 problem(s)
rocky-release-8.10-1.14.el8.noarch has missing requires of rocky-repos(8)

Errors found in dnf/rpm database.  Please correct before running migrate2rocky.

An error occurred while we were attempting to convert your system to Rocky Linux. Your system may be unstable. Script will now exit to prevent possible damage.

How to solve this issue?

添加评论
点赞收藏
点踩分享查看原文
评论
?
参与讨论