Gadget Review: HIKMICRO D02 Thermal Camera ★★★★★
The good folks at Hikmicro have sent me their D02 Infrared Camera to review. It's part of their "Eco" series of thermal imagers - designed to be easy to use around the home and relatively cheap.
Despite the no-fills appearance, it packs in a lot of features which put some more expensive models to shame. It even works with Linux. Shove in a USB-C cable to grab the photos or even use it as a webcam.
All the images you see in this post are unaltered. I haven't optimised them or stripped the metadata; what you see is what you get.
Let's go!
Specs and Pictures
Infrared cameras usually have tiny sensors - the D02 is no different, you get 96x96 pixels of thermal information upscaled to 240x240.
Where the D02 shines is that it also has an optical camera just below the thermal sensor. This allows the camera to combine both the thermal and optical images into one "fusion" image.
Here's an example of the thermal image:
The optical image has a higher resolution - 480x640:
It isn't the highest quality lens in the world, but more than adequate for seeing what's going on.
Once fused, the image looks like this:
With the two images overlayed, you get a reasonably clear photo. The visual shows a good amount of detail and the thermal image shows what's hot.
It mostly works. If you're pointing at something very close to the sensor then you'll end up with a slightly surreal image like this which show the two out of alignment.
Storage is limited to around 2.5GB with no SD card slot. But given that photos are typically less than 150KB, you'll fit tens of thousands on there before worrying about running out of space.
Videos
Videos are a bit bigger, about 12MB per minute in MP4 format. But, again, you'll be able to store a couple of hours of footage on there without worry.
Again, 240x240 upscaled. Good enough for domestic use. No audio. What you see is what you get.
EXIF
There's not much useful EXIF - just the timestamp and camera serial number. That said, all the images and videos are…